50mm (2inch) Grey Powder Coated Aluminium Sign Poles

from £46.64 ex. VAT

Grey Powder Coated Aluminium Sign Posts

  • 3mm Thick Wall for extra strength
  • 50mm (2inch) Outside Diameter
  • Choose from our set pole sizes or let us know the size you need

 

Each Pole Set will contain the following:
Single Pole – 1 Top Cap, 1 Pole, 2 2” Clips and 1 Anti Rotate Base
Pair of Poles – 2 Top Caps, 2 Poles, 4 2” Clips and 2 Anti Rotate Bases

This pack does not include Backrails, You will not need to order backrails if your sign already comes with them.
Backrails – Click Here

Choose your product options

Quantity
Total Price

Awaiting Selection

per unit

Awaiting Selection

Start designing

FAQs

FAQ - Fitting with Backrails (4)

The video below shows how to do the job using Postmix concrete. This is available from your local Builders Merchant.

In the video, a Post Hole Digger is being used. A hole dug by this piece of equipment creates a hole that is about 250mm wide without disturbing the soil around so needs less concrete & when set is much smaller & more secure than a spade-dug hole.

Click to watch video

When ordering your poles allow for a minimum of 500mm in the ground (Order your poles here)

Fitting to extra-large poles requires extra-large clips. The solution is to use very large jubilee clips that can be tightened to fit the pole. The jubilee clip goes through slots on a fixing that slides into the back rails and then around the lamp-post. Tighten the jubilee clip with a screwdriver. 2 Rail Sliders & 2 jubilee clips are needed per sign. Order at the checkout.

When you order your sign with the back rails option we rivet aluminium back rails to the rear of your sign with one rail at the top & one rail at the bottom. A clip is inserted into the rail & twisted to lock in position. The clip then goes around the pole & the other end of the clip is fixed with a slide-in bolt to the back rail.

If you are replacing an existing sign then you may already have the clips & pole so when you receive your sign with back rails in position you will be ready to fix

If you need new clips CHOOSE HERE. For 1 pole you need 2 clips. For a sign attached to 2 poles, you need 4 clips.

If you need to erect a new pole then GO TO OUR NEW POLE SECTION

Please click live chat & ask us any question you like. We will answer your question on live chat & if the answer to your question is likely to be of interest to others then we will add it to our FAQ list & thank you.

Looking for a different product?

Quickly find what you are looking for in the search box below

SITE BOARDS & BANNERS PROMOTION

For every 2 you order, we will automatically add an extra one to your shipment, ie Order 4 & we will add 2 extra, order 6 & get 9