When you order your sign with the back rails option we rivet aluminium back rails to the rear of your sign with one rail at the top & one rail at the bottom. A clip is inserted into the rail & twisted to lock in position. The clip then goes around the pole & the other end of the clip is fixed with a slide-in bolt to the back rail.
If you are replacing an existing sign then you may already have the clips & pole so when you receive your sign with back rails in position you will be ready to fix
If you need new clips CHOOSE HERE. For 1 pole you need 2 clips. For a sign attached to 2 poles, you need 4 clips.
If you need to erect a new pole then GO TO OUR NEW POLE SECTION
